Home › Steering › STEERING COLUMN › STEERING COLUMN ASSEMBLY
RM3090E _55 Steering _008773 STEERING COLUMN _0049531 STEERING COLUMN ASSEMBLY G

STEERING COLUMN  STEERING COLUMN ASSEMBLY  INSPECTION  


CAUTION / NOTICE / HINT

NOTICE:
·

When using a vise, place aluminum plates between the part and vise.


·

When using a vise, do not overtighten it.



PROCEDURE

Hide 4520A 1.INSPECT ELECTRIC POWER STEERING COLUMN SUB-ASSEMBLY

a.

Secure the steering column assembly in a vise.


b.
C275629
2.854,0.49 2.021,0.656 2.021,0.656 1.844,1.146 true 1.698,1.885 1.792,1.427 true 2.594,1 2.688,0.542 true 1.583,1.885 1.896,2.042 0.313,0.156 10 *1 2.896,0.396 3.208,0.552 0.313,0.156 10 *2
*1 Collar
*2 Bushing


Check that the 2 bushings are securely installed to the steering column assembly.

HINT:

If the bushings are missing or damaged, replace the steering column assembly with a new one.



c.

Inspect the capsule.

i.
C275630
0.583,0.333 2.167,0.333 2.167,0.333 2.313,0.531 true 1.052,0.542 0.906,0.333 false 0.396,0.25 0.708,0.406 0.313,0.156 10 false *1 2.927,0.458 3.083,0.656 0.156,0.198 10 false A
*1 Capsule


Check that the capsule is securely installed to the steering column assembly as shown in the illustration.

Standard dimension (A):

4.8 mm (0.189 in.)


If the capsule is not positioned as specified, replace the steering column assembly with a new one.


ii.

Check the capsule for deformation and damage.

If the capsule is deformed, loose, missing or damaged, replace the steering column assembly with a new one.