Home › Brake › BRAKE (FRONT) › FRONT BRAKE(for 17 inch Front Disc Brake)
RM3090E _54 Brake _008769 BRAKE (FRONT) _0049556 FRONT BRAKE(for 17 inch Front Disc Brake) A

BRAKE (FRONT)  FRONT BRAKE(for 17 inch Front Disc Brake)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 1.REMOVE CYLINDER BOOT

a.
C278601
2.083,1.25 2.448,0.573 2.448,0.573 2.646,0.573 false 2.729,0.5 2.917,0.677 0.188,0.177 10 *a
*a Protective Tape


Using a screwdriver, remove the cylinder boot from the disc brake cylinder.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the brake piston and cylinder.



Hide 47731 2.REMOVE FRONT DISC BRAKE PISTON

a.
C278602
0.844,1.104 0.75,1.448 0.75,1.448 0.594,1.448 false 0.396,1.365 0.542,1.552 0.146,0.188 10 *a
*a Cloth


Place a piece of cloth between the front disc brake piston and disc brake cylinder.


b.

Apply compressed air to remove the front disc brake piston from the disc brake cylinder.

CAUTION:

Do not place your fingers in front of the piston when applying compressed air.


NOTICE:

Be careful not to spatter the brake fluid.



Hide 3.REMOVE PISTON SEAL

a.
C278603
1.656,1.25 2.313,0.479 2.313,0.479 2.521,0.479 false 2.583,0.417 2.75,0.594 0.167,0.177 10 *a
*a Protective Tape


Using a screwdriver, pry out the piston seal from the disc brake cylinder.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the inner cylinder and piston seal groove.



Hide 31478B 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 47547B 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG

a.

Remove the bleeder plug from the disc brake cylinder.