Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP(for 3ZR-FAE)
RM3090E _54 Brake _008768 BRAKE SYSTEM (OTHER) _0049564 VACUUM PUMP(for 3ZR-FAE) G

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 3ZR-FAE)  INSPECTION  


PROCEDURE

Hide 29331A 1.INSPECT VACUUM PUMP VANE

a.
C169339
1.665,1.497 1.824,1.641 0.158,0.144 10 *2 0.864,1.712 1.018,1.854 0.154,0.142 10 *1 2.135,0.256 2.285,0.403 0.15,0.147 10 *1 2.707,0.665 2.707,0.339 2.707,0.339 2.32,0.339 false 1.323,1.371 1.323,1.584 1.323,1.584 1.641,1.584 false 0.529,1.532 0.529,1.8 0.529,1.8 0.841,1.8 false
*1 Vacuum Pump Vane Cap
*2 Vacuum Pump Vane


Check that the vacuum pump vane or vacuum pump vane caps are not damaged or excessively worn out.

HINT:

If the vacuum pump vane or vacuum pump vane caps are damaged or excessively worn out, replace the damaged parts with new ones.



b.
C169340
1.292,2.283 1.507,2.488 0.215,0.205 10 A 2.345,2.304 2.543,2.495 0.198,0.191 10 A

Using a micrometer, measure length A of the vacuum pump vane with the vacuum pump vane caps removed.

Minimum length A:

23.8 mm (0.937 in.)


HINT:

If the length is not as specified, replace the vacuum pump vane and vacuum pump vane caps with new ones.


NOTICE:

Measure the length 10 mm (0.394 in.) in from each end of the vacuum pump vane.



c.
C169342
1.657,1.544 1.817,1.697 0.16,0.153 10 *1 0.847,3.056 1.028,3.206 0.181,0.149 10 *2 1.432,1.96 1.575,2.103 0.143,0.143 10 B 1.436,2.279 1.579,2.422 0.143,0.143 10 B 1.144,1.958 1.144,1.638 1.144,1.638 1.621,1.638 false 0.512,2.616 0.512,3.151 0.512,3.151 0.813,3.151 false 2.457,2.616 2.457,2.811 2.457,2.811 0.512,2.811 false
*1 Vacuum Pump Vane
*2 Vacuum Vane Cap


Using a vernier caliper, measure length B of the vacuum pump vane with the vacuum pump vane caps installed.

Minimum length B:

76.0 mm (3.00 in.)


HINT:

If the length is not as specified, replace the vacuum pump vane and vacuum pump vane caps with new ones.


NOTICE:

Measure the length 5 mm (0.197 in.) in from each end of the vacuum pump vane caps.



Hide 2.INSPECT VACUUM PUMP HOUSING

a.
C169338

Check that the rotor part, coupling, vacuum pump housing or vacuum end cover is not damaged or excessively worn out.

HINT:

If the rotor part, coupling, vacuum pump housing or vacuum end cover is damaged or excessively worn out, replace the vacuum pump assembly.