Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP(for 3ZR-FAE) › 2012.12–2016.08
RM3090E _54 Brake _008768 BRAKE SYSTEM (OTHER) _0049564 VACUUM PUMP(for 3ZR-FAE) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 3ZR-FAE)  DISASSEMBLY  


PROCEDURE

Hide 29314A 1.REMOVE END COVER

a.
C169334

Using a T25 "TORX" socket wrench, remove the 5 screws and end cover.

NOTICE:
·

Hold the pump so that the pump installation surface, fitting parts and oil pipe will not be damaged.

·

As the housing deforms when force is applied, do not clamp the housing with a tool such as a vise.

·

Securely fit the T25 "TORX" socket wrench to the screws.

·

Do not drop the end cover.

·

Do not damage the end cover.




b.
C169336C03
1.417,0.948 1.677,0.375 1.677,0.375 2.021,0.375 false 2.052,0.292 2.406,0.5 0.354,0.208 10 *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the No. 1 O-ring.

NOTICE:

Do not damage the groove.



Hide 29331A 2.REMOVE VACUUM PUMP VANE

a.
C278623

Remove the vacuum pump vane together with the 2 vacuum pump vane caps.

NOTICE:
·

When reusing the vacuum pump vane and vacuum pump vane caps, make sure to make a note of the installation position and orientation.

·

Do not drop the vacuum pump vane or vacuum pump vane caps.




b.
C169339C02
2.708,0.667 2.708,0.344 2.708,0.344 2.323,0.344 false 1.323,1.375 1.323,1.583 1.323,1.583 1.646,1.583 false 0.531,1.531 0.531,1.802 0.531,1.802 0.844,1.802 false 1.667,1.5 2.01,1.708 0.344,0.208 10 false *2 0.865,1.708 1.135,1.865 0.271,0.156 10 false *1 2.115,0.26 2.365,0.427 0.25,0.167 10 false *1
*1 Vacuum Pump Vane Cap
*2 Vacuum Pump Vane


Remove the 2 vacuum pump vane caps from the vacuum pump vane.

NOTICE:
·

When reusing the vacuum pump vane and vacuum pump vane caps, make sure to make a note of the installation positions and orientation.

·

Do not drop the vacuum pump vane and vacuum pump vane caps.