Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP(When Not Using the Engine Support Bridge for AD Series Engine) › 2012.12–2015.10
RM3090E _54 Brake _008768 BRAKE SYSTEM (OTHER) _0049565 VACUUM PUMP(When Not Using the Engine Support Bridge for AD Series Engine) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(When Not Using the Engine Support Bridge for AD Series Engine)  INSTALLATION  


PROCEDURE

Hide 29300 1.INSTALL VACUUM PUMP ASSEMBLY

a.
C128548C02
1.781,1.052 1.781,1.573 false 2.688,1.229 2.688,1.615 false 2.292,1.375 2.292,1.479 2.292,1.479 2.677,1.479 false 1.708,1.625 1.896,1.833 0.188,0.208 10 *1 2.635,1.646 2.844,1.844 0.208,0.198 10 *2
*1 Oil Pipe
*2 O-Ring


Apply engine oil to the oil pipe at the tip of the vacuum pump.


b.

Coat 2 new O-rings with engine oil, and install them to the vacuum pump.


c.
C278628E01
1.583,0.052 1.74,0.25 0.156,0.198 10 A 2.854,0.083 3.01,0.281 0.156,0.198 10 B

Install the vacuum pump so that the coupling teeth of the vacuum pump labeled A and the groove of the camshaft labeled B can engage.


d.
C261794

Install 3 new flange bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


e.

Connect the 2 vacuum hoses, and slide the clamp to secure it.