Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR(for 2WD)
RM3090E _54 Brake _008767 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0049576 REAR SPEED SENSOR(for 2WD) G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR(for 2WD)  INSPECTION  


PROCEDURE

Hide 89546 1.INSPECT SKID CONTROL SENSOR

a.

Check the skid control sensor.

Under any of the following conditions, replace the sensor with a new one.

·

The surface of the skid control sensor is cracked, dented, or chipped off.

·

The skid control sensor has been dropped.



Hide 89516 2.INSPECT SKID CONTROL SENSOR WIRE

a.

Check the skid control sensor wire.

Under any of the following conditions, replace the sensor with a new one.

·

The connector or wire harness is scratched, cracked, or damaged.