Home › Engine / Hybrid System › 3ZR-FE COOLING › COOLING FAN MOTOR
RM3090E _51 Engine / Hybrid System _008409 3ZR-FE COOLING _0049586 COOLING FAN MOTOR A

3ZR-FE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363A 1.INSTALL NO. 2 COOLING FAN MOTOR

a.

Install the No. 2 cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16363 2.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361B 3.INSTALL NO. 2 FAN

NOTICE:

Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


a.
A270863

Install the No. 2 fan with the nut as shown in the illustration.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16361 4.INSTALL FAN

NOTICE:

Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


a.
A270862

Install the fan with the nut as shown in the illustration.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16711 6.INSTALL FAN SHROUD WITH COOLING FAN