Home › Engine / Hybrid System › 3ZR-FE COOLING › THERMOSTAT
RM3090E _51 Engine / Hybrid System _008409 3ZR-FE COOLING _0049589 THERMOSTAT G

3ZR-FE COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

HINT:

The valve opening temperature is inscribed on the thermostat.


P013560

a.

Immerse the thermostat in water and then gradually heat the water.


b.

Check the valve opening temperature of the thermostat.

Valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve opening temperature is not as specified, replace the thermostat.


c.
A085445
2.542,1.563 2.729,1.729 0.188,0.167 10 *1
*1 Valve Lift


Check the valve lift.

Valve lift:

10 mm (0.394 in.) or more at 95°C (203°F)


If the valve lift is not as specified, replace the thermostat.


d.

Check that the valve is fully closed when the thermostat is at low temperatures (below 77°C (171°F)).

If it is not fully closed, replace the thermostat.