Home › Power Source / Network › 3ZR-FAE BATTERY / CHARGING › CHARGING SYSTEM
RM3090E _57 Power Source / Network _008394 3ZR-FAE BATTERY / CHARGING _0046852 CHARGING SYSTEM J

3ZR-FAE BATTERY / CHARGING  CHARGING SYSTEM  Charge Warning Light Comes ON while Driving  


PROCEDURE

1.CHECK LOCK FUNCTION OF GENERATOR PULLEY WITH CLUTCH
a.

Check the lock function with the pulley installed in the vehicle.

i.

Visually check that the rotor in the generator operates with the engine running.



b.
A267550C02
2.323,0.49 2.583,0.208 2.583,0.208 2.802,0.208 false 2.854,0.125 3.313,0.323 0.458,0.198 10 SST 0.594,1.917 0.906,2.073 0.313,0.156 10 *a
V100135

Free
V100136

Lock


Check the lock function with the pulley removed from the vehicle.

i.

Remove the generator pulley cap.


ii.

Hold the generator rotor using SST, and turn the generator pulley with clutch clockwise to check that the outer ring locks.

OK:

The outer ring locks.




SST
09820-63021  

Result:
OK
NG



OK

2.CHECK INSTALLATION OF GENERATOR PULLEY WITH CLUTCH

NG

REPLACE GENERATOR PULLEY WITH CLUTCH

2.CHECK INSTALLATION OF GENERATOR PULLEY WITH CLUTCH
a.

Start the engine and visually check the generator pulley with clutch for looseness.

OK:

The generator pulley with clutch is not loose.



Result:
OK
NG



OK

NG

TIGHTEN GENERATOR PULLEY WITH CLUTCH TO THE SPECIFIED TORQUE