Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for LH Side) › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008433 SEAT _0049737 REAR SEAT ASSEMBLY(for LH Side) A

SEAT  REAR SEAT ASSEMBLY(for LH Side)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.


PROCEDURE

Hide 71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY

Hide 71960B 2.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

Hide 73340C 3.REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH

Hide 72868 4.REMOVE CENTER ARMREST HINGE COVER RH

a.

Return the seatback to the upright position.


b.
B336607

Detach the clamp to remove the center armrest hinge cover RH.


Hide 71693A 5.REMOVE REAR SEAT NO. 3 CUSHION HINGE COVER

a.
B336608

Detach the clamp.


b.
B336609

Using a screwdriver, detach the 4 claws and clamp to remove the rear seat No. 3 cushion hinge cover.

HINT:

Tape the screwdriver tip before use.



Hide 71694 6.REMOVE REAR SEAT LOWER CUSHION HINGE COVER LH

B336610

a.

Using a screwdriver, detach the 4 claws and clamp to remove the rear seat lower cushion hinge cover LH.

HINT:

Tape the screwdriver tip before use.



Hide 72830 7.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

a.
B336611

Remove the bolt, washer and rear seat center armrest assembly.


Hide 72831B 8.REMOVE REAR SEAT NO. 1 CENTER ARMREST PLATE

a.
B336612

Remove the rear seat No. 1 center armrest plate.


Hide 71846B 9.REMOVE REAR SEATBACK NO. 1 BOARD CAP

a.
B336613C01
1.917,1.375 2.167,1.875 2.167,1.875 2.438,1.875 false 2.469,1.802 2.781,1.958 0.313,0.156 10 *1
*1 Protective Tape


Using a screwdriver, detach the 3 claws to remove the rear seatback No. 1 board cap.

HINT:

Tape the screwdriver tip before use.



Hide 72526A 10.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

a.
B336614

Remove the 3 screws and reclining adjuster release handle LH.


Hide 11.REMOVE REAR NO. 1 SEAT CUSHION ASSEMBLY LH

a.
B336615

Remove the 2 bolts and 2 bushes and lift up the cushion as shown in the illustration.


b.
B336616
0.75,0.833 0.906,1.031 0.156,0.198 10 1 0.5,1.167 0.656,1.365 0.156,0.198 10 2

Detach the clamp of the cable end.


c.

Disconnect the cable in the order shown in the illustration.


d.
B336617

Remove the 3 clamps.


e.
B336618C01
2.115,1.052 2.615,0.521 2.615,0.521 2.833,0.521 false 2.875,0.417 3.188,0.615 0.313,0.198 10 *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws to remove the rear seatback cover.

HINT:

Tape the screwdriver tip before use.



f.
B340573

Remove the 2 bolts, 2 bushes and rear No. 1 seat cushion assembly LH.


Hide 71076S 12.REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

a.
B340574

Detach the 20 hooks and remove the separate type seat cushion cover (with pad) from the rear seat spring assembly LH.


b.
B340575

Remove the 5 hog rings.


c.
B340576

Remove the 13 hog rings and separate type rear seat cushion cover from the rear seat cushion pad LH.


Hide 71826B 13.REMOVE REAR SEAT CUSHION MOULDING LH

a.
B340577

Detach the claw and 3 hooks to remove the rear seat cushion moulding LH.


Hide 72998C 14.REMOVE REAR SEAT COVER LH

a.
B340578

Remove the clip and screw.


b.

Using a screwdriver, detach the claw to remove the rear seat cover LH.


Hide 72997 15.REMOVE REAR SEATBACK COVER LH

a.
B340579

Remove the clip and screw.


b.

Using a screwdriver, detach the claw to remove the rear seatback cover LH.


Hide 71829B 16.REMOVE REAR SEAT REAR CUSHION MOULDING LH

B340580

a.

w/ Seat Belt Warning System:

Detach the 2 clamps.


b.

Detach the claw and clamp to remove the rear seat rear cushion moulding LH.


Hide 72380 17.REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY

B340581
0.99,0.76 1.146,0.958 0.156,0.198 10 1 2.625,2.719 2.813,2.948 0.188,0.229 10 1 0.292,0.74 0.448,0.938 0.156,0.198 10 2 3.188,3.073 3.344,3.271 0.156,0.198 10 2

a.

Detach the 4 clamps.


b.

Detach the 2 clamps of the cable end.


c.

Disconnect the 2 cables in the order shown in the illustration and remove the No. 2 seat adjuster control cable.


Hide 73380D 18.REMOVE REAR SEAT INNER BELT ASSEMBLY LH

a.
B340582

Remove the bolt and rear seat inner belt assembly.


Hide 19.REMOVE REAR NO. 1 SEATBACK ASSEMBLY LH

a.
B340583

Remove the 3 bolts and rear No. 1 seatback assembly LH from the rear seat reclining adjuster assembly LH.


Hide 71882A 20.REMOVE REAR SEATBACK BOARD LH

a.
B340584

Remove the 6 hog rings and detach the 2 pieces of fastening tape.


b.
B340585

Detach the 7 claws and clamp to remove the rear seatback board assembly LH.


Hide 71078S 21.REMOVE SEPARATE TYPE REAR SEATBACK COVER

a.
B340586

Detach the 8 claws to remove the 4 rear seat headrest supports.


b.
B340587

Detach the 9 clamps.


c.

Remove the separate type rear seatback cover (with pad) from the rear seatback frame sub-assembly LH.


d.
B340588

Remove the 5 hog rings.


e.
B340589

Remove the 11 hog rings and separate type rear seatback cover from the separate type rear seatback pad.