Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for LH Side) › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008433 SEAT _0049737 REAR SEAT ASSEMBLY(for LH Side) A

SEAT  REAR SEAT ASSEMBLY(for LH Side)  INSTALLATION  


PROCEDURE

Hide 79915 1.INSTALL SEAT LEG BRACKET

a.

Attach the guide.


b.

Attach the clamp and install the seat leg bracket with the 4 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 2.INSTALL REAR SEAT ASSEMBLY LH

a.

Fully tilt the seatback forward.


b.

Place the rear seat assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



c.

Temporarily install the rear seat assembly LH with the 5 bolts.


d.

Lift up the seat track adjusting handle and move the seat to the foremost position.


e.
B336605
2.271,0.448 2.427,0.646 0.156,0.198 10 1 1.781,0.26 1.938,0.458 0.156,0.198 10 2 0.094,1.104 0.25,1.302 0.156,0.198 10 3

Tighten the 3 bolts on the rear side of the seat.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



f.

Lift up the seat track adjusting handle and move the seat to the rearmost position.


g.
B336602
0.125,0.823 0.281,1.021 0.156,0.198 10 1 1.625,1.75 1.781,1.948 0.156,0.198 10 2

Tighten the 2 bolts on the front side of the seat.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



Hide 79966 3.INSTALL REAR SEAT NO. 3 LEG SIDE COVER

B336597

a.

Attach the 2 guides and 4 claws to install the rear seat No. 3 leg side cover in the direction shown by the arrow in the illustration.


Hide 79956D 4.INSTALL REAR SEAT FRONT BRACKET COVER LH

a.

Attach the 4 claws to install the rear seat front bracket cover LH.