Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for RH Side) › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008433 SEAT _0049738 REAR SEAT ASSEMBLY(for RH Side) A

SEAT  REAR SEAT ASSEMBLY(for RH Side)  REMOVAL  


PROCEDURE

Hide 79955A 1.REMOVE REAR SEAT FRONT BRACKET COVER RH

a.
B336599

Using a screwdriver, detach the 4 claws.

HINT:

Tape the screwdriver tip before use.



b.

Detach the 2 guides and remove the rear seat front bracket cover RH in the direction shown by the arrow in the illustration.


Hide 79965 2.REMOVE REAR SEAT NO. 2 LEG SIDE COVER

a.
B336598

Using a screwdriver, detach the 4 claws to remove the rear seat No. 2 leg side cover.

HINT:

Tape the screwdriver tip before use.



Hide 3.REMOVE REAR SEAT ASSEMBLY RH

a.

Lift up the seat track adjusting handle and move the seat to the rearmost position.


b.
B336603

Remove the 2 bolts on the front side of the seat.


c.

Lift up the seat track adjusting handle and move the seat to the foremost position.


d.
B336606C01
1.021,1.115 0.865,0.802 0.865,0.802 0.625,0.802 false 0.479,0.74 0.792,0.938 0.313,0.198 10 *1
*1 Rubber Band


w/ Seat belt warning system:

Disconnect the 2 connectors.


e.

Detach the rubber band.


f.

Remove the 3 bolts on the rear side of the seat.


g.

Fully tilt the seatback forward. Then remove the seat.

NOTICE:

Be careful not to damage the vehicle body.



Hide 79915 4.REMOVE SEAT LEG BRACKET

B336604

a.

Detach the clamp and remove the 4 bolts.


b.

Detach the guide to remove the seat leg bracket.