79915
1.INSTALL SEAT LEG BRACKET
Attach the guide.
Attach the clamp and install the seat leg bracket with the 4 bolts.
2.INSTALL REAR SEAT ASSEMBLY RH
Fully tilt the seatback forward.
Place the rear seat assembly RH in the cabin.
Be careful not to damage the vehicle body.
Temporarily install the rear seat assembly RH with the 5 bolts.
Lift up the seat track adjusting handle and move the seat to the foremost position.
| *1 | Rubber Band |
Tighten the 3 bolts on the rear side of the seat.
Tighten the bolts in the order indicated in the illustration.
w/ Seat Belt Warning System:
Connect the 2 connectors.
Attach the rubber band.
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Tighten the 2 bolts on the front side of the seat.
Tighten the bolts in the order indicated in the illustration.
79965
3.INSTALL REAR SEAT NO. 2 LEG SIDE COVER
Attach the 4 claws to install the rear seat No. 2 leg side cover.
79955A
4.INSTALL REAR SEAT FRONT BRACKET COVER RH
Attach the 2 guides and 4 claws to install the rear seat front bracket cover RH in the direction shown by the arrow in the illustration.