Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR CLOSER SWITCH
RM3090E _59 Vehicle Exterior _008794 DOOR / HATCH _0049523 POWER BACK DOOR CLOSER SWITCH G

DOOR / HATCH  POWER BACK DOOR CLOSER SWITCH  INSPECTION  


PROCEDURE

Hide 84930 1.INSPECT DOOR CONTROL SWITCH ASSEMBLY

a.

Check the operation of the door control switch assembly.

i.
B338154
1.615,3.042 1.823,2.667 true 2.135,2.646 2.385,3.094 true 2.427,3.104 2.885,3.302 0.458,0.198 10 CLS 1.51,3.104 1.667,3.302 0.156,0.198 10 E 1.906,1.677 2.219,1.833 0.313,0.156 10 *a
*a Component without harness connected
(Door Control Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (CLS) - 2 (E) Door control switch assembly not pushed 10 kΩ or higher
Door control switch assembly pushed Below 1 Ω


If the result is not as specified, replace the door control switch.