Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY(w/o Entry and Start System) › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008782 DOOR LOCK _0049908 TRANSMITTER BATTERY(w/o Entry and Start System) A

DOOR LOCK  TRANSMITTER BATTERY(w/o Entry and Start System)  REPLACEMENT  


PROCEDURE

Hide 89751A 1.REMOVE TRANSMITTER HOUSING COVER

a.
B317344C02
1.51,1.448 1.365,1.583 1.365,1.583 1.167,1.583 false 1,1.5 1.198,1.688 0.198,0.188 10 *1
*1 Protective Tape


Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

NOTICE:

Do not forcibly pry the cover.


HINT:
·

Tape the screwdriver tip before use.

·

Open the cover as shown in the illustration so as not to drop the button.




Hide 89071B 2.REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

a.
B317346C02
1.365,0.667 0.75,0.667 false 0.563,0.594 0.76,0.802 0.198,0.208 10 *1
*1 Protective Tape


Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

NOTICE:

Handle each part with care as they are delicate electrical parts.


HINT:
·

Tape the screwdriver tip before use.

·

When removing the module, be careful not to drop the button.




Hide 89745A 3.REMOVE TRANSMITTER BATTERY

a.
B317348

Disengage the 7 claws and remove the transmitter battery cover.


b.
B317349

Remove the transmitter battery (lithium battery: CR2016).

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery. The terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




Hide 89745A 4.INSTALL TRANSMITTER BATTERY

a.
B317350

Install a new transmitter battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

Be careful not to bend the transmitter battery electrode during insertion.

·

Keep the transmitter cover interior free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




b.

Engage the 7 claws and install the transmitter battery cover.


Hide 89071B 5.INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

a.
B317347

Install the door control transmitter module set sub-assembly into the transmitter housing case.


Hide 89751A 6.INSTALL TRANSMITTER HOUSING COVER

a.
B279141

Install the transmitter housing cover to the transmitter housing case.