Home › Engine / Hybrid System › 2AD-FTV ENGINE CONTROL › ECD SYSTEM(for DPF)
RM3090E _51 Engine / Hybrid System _008377 2AD-FTV ENGINE CONTROL _0046807 ECD SYSTEM(for DPF) W

2AD-FTV ENGINE CONTROL  ECD SYSTEM(for DPF)  CUSTOMIZE PARAMETERS  


CUSTOMIZE ENGINE CONTROL SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Others.


v.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
Body Ctrl with Torque Demand Function to control the amount of body pitch and bounce to improve ride comfort and handling stability. ON 00000000:ON,00000001:OFF ECM
50006 98
HINT:

Set the function to ON as it helps improve ride comfort and handling stability by controlling the amount of body pitch and bounce.