Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER › 2012.12–2013.11
RM3090E _56 Audio / Visual / Telematics _008775 AUDIO / VIDEO _0049965 INSTRUMENT PANEL SPEAKER A

AUDIO / VIDEO  INSTRUMENT PANEL SPEAKER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 55535B 1.REMOVE NO. 2 SPEAKER HOLE COVER

a.
B337787C01
2.063,1.354 2.219,1.552 0.156,0.198 10 false .
V100155

Protective Tape


Apply protective tape as shown in the illustration.


b.

Using moulding remover B, detach the 2 clips, 2 claws and 2 guides and remove the No. 2 speaker hole cover.


Hide 86160P 2.REMOVE FRONT NO. 2 SPEAKER ASSEMBLY

NOTICE:

Do not touch the cone part of the speaker.


a.
B335786

Remove the 2 bolts and front No. 2 speaker assembly.


b.

Disconnect the connector.