Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER RESISTOR
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0049969 BLOWER RESISTOR A

HEATING / AIR CONDITIONING  BLOWER RESISTOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 87138C 1.INSTALL BLOWER RESISTOR

a.

Install the blower resistor with the 2 screws.


b.

Connect the connector.


Hide 55607 2.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY