Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0050028 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 87138C 1.REMOVE BLOWER RESISTOR (for Manual Air Conditioning System)

a.
E265979

Remove the 2 screws and blower resistor.


Hide 87103B 2.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Manual Air Conditioning System)

a.
E265980

Remove the 3 screws and blower motor with fan sub-assembly.


Hide 87103B 3.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
E265981

Remove the 3 screws and blower motor with fan sub-assembly.


Hide 87130K 4.REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Manual Air Conditioning System)

a.

Remove the 2 screws and No. 1 blower damper servo sub-assembly.

E269745
0.073,0.073 0.385,0.229 0.313,0.156 10 *A 3.917,0.083 4.229,0.24 0.313,0.156 10 *B
*A for LHD *B for RHD



Hide 87130K 5.REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.

Remove the 2 screws and No. 1 blower damper servo sub-assembly.

E269747
0.083,0.094 0.396,0.25 0.313,0.156 10 *A 3.844,0.135 4.156,0.292 0.313,0.156 10 *B
*A for LHD *B for RHD