Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
87130K
1.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Manual Air Conditioning System)
Install the link of the No. 1 blower damper servo sub-assembly to the link of the blower assembly as shown in the illustration.
| *A | for LHD | *B | for RHD |
Install the No. 1 blower damper servo sub-assembly with the 2 screws.
87130K
2.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
Install the link of the No. 1 blower damper servo sub-assembly to the link of the blower assembly as shown in the illustration.
| *A | for LHD | *B | for RHD |
Install the No. 1 blower damper servo sub-assembly with the 2 screws.
87103B
3.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Manual Air Conditioning System)
Install the blower motor with fan sub-assembly with the 3 screws.
87103B
4.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Automatic Air Conditioning System)
Install the blower motor with fan sub-assembly with the 3 screws.
87138C
5.INSTALL BLOWER RESISTOR (for Manual Air Conditioning System)
Install the blower resistor with the 2 screws.