Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for 3ZR-FE, 3ZR-FAE, 2AR-FE)
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0050031 CONDENSER(for 3ZR-FE, 3ZR-FAE, 2AR-FE) G

HEATING / AIR CONDITIONING  CONDENSER(for 3ZR-FE, 3ZR-FAE, 2AR-FE)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 88450 1.INSPECT CONDENSER WITH RECEIVER ASSEMBLY

a.

If the condenser with receiver assembly fins are dirty, clean them with water and dry with compressed air.

NOTICE:

Do not damage the condenser with receiver assembly fins.



b.

If any condenser with receiver assembly fins are bent, straighten them using a screwdriver or pliers.


Hide 2.INSPECT FOR REFRIGERANT LEAK

a.

Using a halogen leak detector, check pipe joints for refrigerant leaks.


b.

If a refrigerant leak is detected in a joint, check the torque of the joint.