Home › Vehicle Interior › HEATING / AIR CONDITIONING › AMBIENT TEMPERATURE SENSOR
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0050033 AMBIENT TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  AMBIENT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88625P 1.INSPECT COOLER (AMBIENT TEMPERATURE SENSOR) THERMISTOR

a.
E269966
3.094,1.396 2.958,1.396 2.958,1.396 2.885,0.656 true 1.719,2.698 1.583,2.698 1.583,2.698 1.365,2.958 true 0.354,0.302 0.583,0.49 0.229,0.188 10 *a 1.75,4.375 1.979,4.563 0.229,0.188 10 *d 3.135,1.281 3.365,1.469 0.229,0.188 10 *b 0.083,2.75 0.313,2.938 0.229,0.188 10 *c 1.76,2.604 1.99,2.792 0.229,0.188 10 *e
*a Component without harness connected
(Cooler (Ambient Temperature Sensor) Thermistor)
*b Sensing Portion
*c Resistance (kΩ)
*d Temperature (°C (°F))
*e Allowable Range


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
1 - 2 15°C (59°F) 2.45 to 2.88 kΩ
1 - 2 20°C (68°F) 1.95 to 2.30 kΩ
1 - 2 25°C (77°F) 1.60 to 1.80 kΩ
1 - 2 30°C (86°F) 1.28 to 1.47 kΩ
1 - 2 35°C (95°F) 1.00 to 1.22 kΩ
1 - 2 40°C (104°F) 0.80 to 1.00 kΩ
1 - 2 45°C (113°F) 0.65 to 0.85 kΩ
1 - 2 50°C (122°F) 0.50 to 0.70 kΩ
1 - 2 55°C (131°F) 0.44 to 0.60 kΩ
1 - 2 60°C (140°F) 0.36 to 0.50 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensor may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (see the graph).


If the result is not as specified, replace the cooler (ambient temperature sensor) thermistor.