Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55412C
1.REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL
55670
2.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
55680A
3.REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
55521C
4.REMOVE STEREO OPENING COVER (w/o Audio)
86120
5.REMOVE RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)
6.REMOVE NAVIGATION RECEIVER (w/ Navigation System)
55406B
7.REMOVE AIR CONDITIONING PANEL ASSEMBLY
Detach the 2 clips and 2 hooks.
Disconnect the connector.
Detach the 2 claws and disconnect the airmix damper control cable sub-assembly.
Detach the 2 claws, disconnect the No. 2 heater control cable sub-assembly and then remove the air conditioning panel assembly.