Home › Vehicle Interior › HEATING / AIR CONDITIONING › HEATER ASSEMBLY › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0050044 HEATER ASSEMBLY A

HEATING / AIR CONDITIONING  HEATER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL WATER HOSE AND FUEL HOSE

E269740C01
0.135,0.729 0.448,0.885 0.313,0.156 10 *a 3,0.844 3.313,1 0.313,0.156 10 *b 3.094,2.125 3.406,2.281 0.313,0.156 10 *b
*a 45°
*b 90°


a.

Connect the 2 water hoses and fuel hose to the heater assembly and engage the 3 clips as shown in the illustration.


Hide 87403A 2.INSTALL NO. 1 EXHAUST PIPE SUB-ASSEMBLY

a.

Install the 2 new gaskets to the heater assembly.


b.

Install the No. 1 exhaust pipe sub-assembly to the heater assembly with the 2 bolts.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


Hide 87100A 3.INSTALL HEATER AND ACCESSORY ASSEMBLY

a.
E269424
0.583,0.583 0.698,0.74 0.698,0.74 0.729,0.573 true 2.01,1.875 2.125,2.031 2.125,2.031 2.156,1.865 true 2.906,1.635 3.021,1.792 3.021,1.792 3.052,1.625 true 0.667,0.75 0.906,0.958 0.24,0.208 10 *1 2.073,2.063 2.313,2.271 0.24,0.208 10 *1 2.958,1.781 3.198,1.99 0.24,0.208 10 *1
*1 Marking


Install the heater and accessory assembly with the 2 bolts and nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


b.

Connect the No. 1 exhaust pipe sub-assembly to the body with the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


c.

Connect each hose and engage the 3 clips as shown in the illustration.


d.

Connect the connector to the heater and accessory assembly.


Hide 87403B 4.INSTALL EXHAUST PIPE SUB-ASSEMBLY

a.

Install a new gasket to the No. 2 exhaust pipe sub-assembly.


b.

Temporarily install the No. 2 exhaust pipe sub-assembly with the 2 nuts and bolt.


c.

Tighten the 2 nuts and then tighten the bolt.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)