Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050046 SIDE TURN SIGNAL LIGHT ASSEMBLY G

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81740 1.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

a.
E264099
0.844,0.813 1.365,0.969 true 1.958,0.958 2.521,0.771 true 2.594,0.667 2.75,0.865 0.156,0.198 10 false B 0.688,0.698 0.844,0.896 0.156,0.198 10 false E 0.115,0.094 0.427,0.292 0.313,0.198 10 false *a
*a Component without harness connected
(Side Turn Signal Light Assembly LH)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 2 (E)
Illuminates


If the result is not as specified, replace the side turn signal light assembly LH.


Hide 81730 2.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

a.
E264099
0.844,0.813 1.365,0.969 true 1.958,0.958 2.521,0.771 true 2.594,0.667 2.75,0.865 0.156,0.198 10 false B 0.688,0.698 0.844,0.896 0.156,0.198 10 false E 0.115,0.094 0.427,0.292 0.313,0.198 10 false *a
*a Component without harness connected
(Side Turn Signal Light Assembly RH)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 2 (E)
Illuminates


If the result is not as specified, replace the side turn signal light assembly RH.