Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM3090E _59 Vehicle Exterior _008795 WIPER / WASHER _0050085 REAR WIPER MOTOR A

WIPER / WASHER  REAR WIPER MOTOR  REMOVAL  


PROCEDURE

Hide 67939B 1.REMOVE BACK DOOR CENTER GARNISH

Hide 67938A 2.REMOVE BACK DOOR SIDE GARNISH LH

Hide 67937B 3.REMOVE BACK DOOR SIDE GARNISH RH

Hide 67750 4.REMOVE BACK DOOR TRIM BOARD ASSEMBLY

Hide 85192R 5.REMOVE REAR WIPER ARM COVER

a.
E268342N01
0.792,0.99 1.25,1.188 0.458,0.198 10 (A) 2.365,0.135 2.823,0.333 0.458,0.198 10 (B)

Detach the 2 claws (A) and open the rear wiper arm cover as shown in the illustration.


b.

Detach the 2 claws (B) and remove the rear wiper arm cover.


Hide 6.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

a.
E268343

Remove the nut and the rear wiper arm and blade assembly.


Hide 85169R 7.REMOVE NO. 1 REAR WIPER LINK PIVOT WASHER

a.
E268344

Remove the No. 1 rear wiper link pivot washer.


Hide 85110R 8.REMOVE REAR WIPER MOTOR ASSEMBLY

a.
E268345

Disconnect the connector.


b.

Remove the 3 bolts and rear wiper motor assembly.