Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER RUBBER
RM3090E _59 Vehicle Exterior _008795 WIPER / WASHER _0050086 REAR WIPER RUBBER A

WIPER / WASHER  REAR WIPER RUBBER  REPLACEMENT  


PROCEDURE

Hide 85220R 1.REMOVE REAR WIPER BLADE ASSEMBLY

a.
E268360

Raise the wiper arm, and then detach the claw by rotating the wiper blade to the position where a "click" sound is heard as shown in the illustration.

NOTICE:

Be careful not to damage the claw.



b.
E268361

Pull the wiper blade straight toward the left side of the vehicle to remove it from the wiper arm.

NOTICE:

Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.



Hide 85214R 2.REMOVE REAR WIPER RUBBER

a.
E268362
1.24,1.49 1.552,1.688 0.313,0.198 10 *a 2.698,0.365 3.01,0.563 0.313,0.198 10 *b 3.125,0.708 3.313,0.885 0.188,0.177 10 *c 3.052,1.698 3.281,1.875 0.229,0.177 10 *d
*a Stopper (Rear End of Blade)
*b Lightly Push (Grip)
*c Lift
*d Pull


Lift and pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration to remove the wiper rubber.

NOTICE:

Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.


HINT:

Lightly pushing the rubber between the ends and middle allows it to be removed more easily.



b.

Remove the 2 backing plates from the wiper rubber.


Hide 85214R 3.INSTALL REAR WIPER RUBBER

a.
E268363
2,1.333 2,1.667 false 1.948,1.677 2.26,1.875 0.313,0.198 10 *1
*1 Backing Plate


Install the 2 backing plates as shown in the illustration.

NOTICE:

Install the backing plates so that they are facing in the correct direction.



b.
E268364
1.406,0.396 1.896,0.448 true 2.542,1.219 2.052,1.583 true 2.688,1.427 2.667,1.677 false 1.229,0.313 1.542,0.51 0.313,0.198 10 *1 1.885,1.531 2.198,1.729 0.313,0.198 10 *2 2.604,1.719 2.917,1.917 0.313,0.198 10 *3
*1 Second Claw
*2 Rear End Claw
*3 Rear End Stopper


Insert the wiper rubber into the front end of the wiper blade and slide it towards the rear end through the second claw.


c.

After pushing the wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.


d.
E268365
1.74,0.344 2.24,0.344 false 2.281,0.26 2.594,0.458 0.313,0.198 10 *1
*1 Front End Claw


Slide the wiper rubber through the front end claw.


Hide 85220R 4.INSTALL REAR WIPER BLADE ASSEMBLY

a.
E268366

Push the wiper blade straight toward the right side of the vehicle to attach the claw and install the wiper blade to the wiper arm.

NOTICE:

Be careful not to damage the claw.