Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Rear Side)
RM3090E _59 Vehicle Exterior _008795 WIPER / WASHER _0050091 WASHER NOZZLE(for Rear Side) N

WIPER / WASHER  WASHER NOZZLE(for Rear Side)  ADJUSTMENT  


PROCEDURE

Hide 85035R 1.ADJUST REAR WASHER NOZZLE SUB-ASSEMBLY

a.
E268411

Using a screwdriver, adjust the direction of the rear washer nozzle sub-assembly.

NOTICE:

Do not use a safety pin or other pointed tools. Doing so may damage the inside of the rear washer nozzle sub-assembly.


HINT:

Use a thin-bladed screwdriver with a tip approximately 1 mm (0.0394 in.) thick.