Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR
RM3090E _59 Vehicle Exterior _008795 WIPER / WASHER _0050095 HEADLIGHT CLEANER MOTOR G

WIPER / WASHER  HEADLIGHT CLEANER MOTOR  INSPECTION  


PROCEDURE

Hide 85280A 1.INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

a.

Remove the washer jar.


b.

Disconnect the headlight cleaner washer motor and pump connector.

HINT:

Make sure that the headlight cleaner washer motor and pump is installed to the washer jar.



c.

Fill the washer jar with washer fluid.


d.
E268392

Connect the positive (+) lead of the battery to terminal 2 of the headlight cleaner washer motor and pump, and the negative (-) lead to terminal 1.


e.

Check that washer fluid flows from the washer jar.

OK:

Washer fluid flows from the washer jar.


If the result is not as specified, replace the headlight cleaner motor and pump assembly.