Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050102 LICENSE PLATE LIGHT ASSEMBLY A

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 67765A 1.REMOVE NO. 1 BACK DOOR SERVICE HOLE COVER

a.
E269042
1.771,0.375 2.115,0.74 true 1.625,0.208 1.938,0.406 0.313,0.198 10 *1
*1 Protective Tape


Using a screwdriver, detach the 4 claws and 4 guides to remove the No. 1 back door service hole cover.

HINT:

Tape the screwdriver tip before use.



Hide 81690A 2.REMOVE LICENSE PLATE LIGHT ASSEMBLY LH

E269043

a.

Disconnect the connector.


b.

Detach the 2 claws to remove the license plate light assembly LH.