75741E
1.INSTALL SYMBOL EMBLEM
| *1 | Boss |
Install a new symbol emblem.
Using a heat light, heat the vehicle body and a new symbol emblem.
Remove the peeling paper from the face of the symbol emblem.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Align the boss positions and install the symbol emblem.
Press the symbol emblem firmly to install it.
75441B
2.INSTALL BACK DOOR NAME PLATE
When installing the back door name plate, heat the back door panel and back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Back Door Panel | 40 to 60°C (104 to 140°F) |
| Back Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the back door panel or back door name plate excessively.
Clean the back door panel surface.
Using a heat light, heat the back door panel surface.
Remove the double-sided tape from the back door panel.
Wipe off any tape adhesive residue with cleaner.
| *a | Reference Values |
Install a new back door name plate.
Using a heat light, heat the back door panel and a new back door name plate.
Remove the peeling paper from the face of the back door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the back door name plate in the position shown in the illustration.
Press the back door name plate firmly to install it.
| Area | Specified Condition |
|---|---|
| A | 211.8 mm (8.339 in.) |
| B | 203.6 mm (8.016 in.) |
75431A
3.INSTALL NO. 1 BACK DOOR EMBLEM
When installing the No. 1 back door emblem, heat the back door panel and No. 1 back door emblem using a heat light.
| Item | Temperature |
|---|---|
| Back Door Panel | 40 to 60°C (104 to 140°F) |
| No. 1 Back Door Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the back door panel or No. 1 back door emblem excessively.
Clean the back door panel surface.
Using a heat light, heat the back door panel surface.
Remove the double-sided tape from the back door panel.
Wipe off any tape adhesive residue with cleaner.
| *a | Reference Values |
Install a new No. 1 back door emblem.
Using a heat light, heat the back door panel and a new No. 1 back door emblem.
Remove the peeling paper from the face of the No. 1 back door emblem.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 back door emblem in the position shown in the illustration.
Press the No. 1 back door emblem firmly to install it.
| Area | Specified Condition |
|---|---|
| A | 210.6 mm (8.291 in.) |
| B | 192.2 mm (7.567 in.) |
75444A
4.INSTALL NO. 4 BACK DOOR NAME PLATE
When installing the No. 4 back door name plate, heat the back door panel and No. 4 back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Back Door Panel | 40 to 60°C (104 to 140°F) |
| No. 4 Back Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the back door panel or No. 4 back door name plate excessively.
Clean the back door panel surface.
Using a heat light, heat the back door panel surface.
Remove the double-sided tape from the back door panel.
Wipe off any tape adhesive residue with cleaner.
| *a | Reference Values |
for Type A:
Install a new No. 4 back door name plate.
Using a heat light, heat the back door panel and a new No. 4 back door name plate.
Remove the peeling paper from the face of the No. 4 back door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the No. 4 back door name plate in the position shown in the illustration.
Press the No. 4 back door name plate firmly to install it.
| Area | Specified Condition |
|---|---|
| A | 187.8 mm (7.394 in.) |
| B | 211.6 mm (8.331 in.) |
| *a | Reference Values |
for Type B:
Install a new No. 4 back door name plate.
Using a heat light, heat the back door panel and a new No. 4 back door name plate.
Remove the peeling paper from the face of the No. 4 back door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the No. 4 back door name plate in the position shown in the illustration.
Press the No. 4 back door name plate firmly to install it.
| Area | Specified Condition |
|---|---|
| A | 187.8 mm (7.394 in.) |
| B | 211.7 mm (8.335 in.) |