Home › Vehicle Interior › HEATING / AIR CONDITIONING › ECO SWITCH
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0050117 ECO SWITCH G

HEATING / AIR CONDITIONING  ECO SWITCH  INSPECTION  


PROCEDURE

Hide 84970 1.INSPECT COMBINATION SWITCH ASSEMBLY (ECO SWITCH)

a.
E113554
1.5,0.083 1.906,0.333 0.406,0.25 1.885,1.781 1.719,1.365 true 1.375,1.781 1.5,1.375 true 0.135,0.125 0.448,0.281 0.313,0.156 10 *a 1.802,1.813 2.135,2.021 0.333,0.208 10 LCC 1.167,1.823 1.5,2.031 0.333,0.208 10 EEF 1.563,0.125 1.896,0.333 0.333,0.208 10 G60
*a Component without harness connected
(Combination Switch Assembly (ECO Switch))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G60-3 (LCC) - G60-4 (EEF) ECO MODE switch is pushed Below 1 Ω
G60-3 (LCC) - G60-4 (EEF) ECO MODE switch is not pushed 1 MΩ or higher


If the result is not as specified, replace the combination switch assembly (ECO switch).