CHECK COMBINATION METER ASSEMBLY
Disconnect the G16 combination meter assembly connector.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: w/o Stop and Start System *2: w/ Stop and Start System |
||||
| G16-40 (B) - Body ground | Y - Body ground | Battery power supply | Always | 11 to 14 V |
| G16-39 (IG+) - Body ground | B - Body ground*1
P - Body ground*2 |
IG power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| G16-21 (ET) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
Reconnect the G16 combination meter assembly connector.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*3: w/ Rear Seat Belt Warning System |
||||
| G16-1 (RLMT) - Body ground*3 | B - Body ground | Rear seat belt LH warning light signal | Rear seat belt LH fastened | Below 1 V |
| Rear seat belt LH unfastened | 11 to 14 V | |||
| G16-2 (RCMT) - Body ground*3 | G - Body ground | Rear seat center belt warning light signal | Rear seat center belt fastened | Below 1 V |
| Rear seat center belt unfastened | 11 to 14 V | |||
| G16-3 (RRMT) - Body ground*3 | L - Body ground | Rear seat belt RH warning light signal | Rear seat belt RH fastened | Below 1 V |
| Rear seat belt RH unfastened | 11 to 14 V | |||
| G16-7 (P/SB) - Body ground | L - Body ground | Front passenger side seat belt warning light signal | Front passenger seat occupied, seat belt fastened | Below 1 V |
| Front passenger seat occupied, seat belt unfastened | 11 to 14 V | |||
| G16-24 (RLSB) - Body ground*3 | G - Body ground | Rear seat belt LH buckle switch signal | Rear seat belt LH fastened | Below 1 V |
| Rear seat belt LH unfastened | 11 to 14 V | |||
| G16-25 (RCSB) - Body ground*3 | B - Body ground | Rear seat center belt buckle switch signal | Rear seat center belt fastened | Below 1 V |
| Rear seat center belt unfastened | 11 to 14 V | |||
| G16-26 (RRSB) - Body ground*3 | W - Body ground | Rear seat belt RH buckle switch signal | Rear seat belt RH fastened | Below 1 V |
| Rear seat belt RH unfastened | 11 to 14 V | |||
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | Main Body ECU (Multiplex Network Body ECU) with 1 connector | *B | Main Body ECU (Multiplex Network Body ECU) with 3 connectors |
Disconnect the 3A, 3B, 3D, 3E and G78 main body ECU (multiplex network body ECU) connectors.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: for LHD *2: for RHD *3: w/ Rear Seat Belt Warning System |
||||
| 3D-9 (GND1) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| 3B-16 (BECU) - Body ground | R - Body ground | Battery power supply | Always | 11 to 14 V |
| 3D-40 (IG) - Body ground | L - Body ground | IG power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| 3A-1 (ACC) - Body ground | W - Body ground | ACC power supply | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| G78-24 (LCTY) - Body ground*3 | W - Body ground*1
SB - Body ground*2 |
Rear door courtesy light switch LH signal | Rear LH door open | Below 1 Ω |
| Rear LH door closed | 10 kΩ or higher | |||
| G78-6 (RCTY) - Body ground*3 | Y - Body ground | Rear door courtesy light switch RH signal | Rear RH door open | Below 1 Ω |
| Rear RH door closed | 10 kΩ or higher | |||
Reconnect the 3A, 3B, 3D, 3E and G78 main body ECU (multiplex network body ECU) connectors.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: for LHD *2: for RHD |
||||
| 3E-34 (DBKL) - Body ground*1 | R - Body ground | Driver side seat belt buckle switch signal | Driver side seat belt fastened | Below 1 V |
| Driver side seat belt unfastened | 11 to 14 V | |||
| 3C-40 (DBKL) - Body ground*2 | R - Body ground | Driver side seat belt buckle switch signal | Driver side seat belt fastened | Below 1 V |
| Driver side seat belt unfastened | 11 to 14 V | |||
| 3D-34 (PKB) - Body ground | B - Body ground | Parking brake switch signal | Ignition switch ON, parking brake switch off | 11 to 14 V |
| Ignition switch ON, parking brake switch on | Below 1.5 V | |||