Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
58901A
1.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
55433B
2.REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
85530
3.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
| *1 | Protective Tape |
Using a screwdriver, detach the claw to remove the No. 1 power outlet socket assembly.
Tape the screwdriver tip before use.
Use the same procedure to remove the other No. 1 power outlet socket assembly.
85535B
4.REMOVE NO. 1 POWER OUTLET SOCKET COVER
Detach the 2 claws and remove the No. 1 power outlet socket cover.
Use the same procedure to remove the other No. 1 power outlet socket cover.