Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH › 2012.12–2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050195 STOP LIGHT SWITCH G

LIGHTING (EXT)  STOP LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.
E269230C01
0.833,0.24 1.146,0.396 0.313,0.156 10 *a 2.333,0.271 2.646,0.427 0.313,0.156 10 *b
*a Component without harness connected
(Stop Light Switch Assembly)
*b Shaft pushed


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Shaft released 10 kΩ or higher
Shaft pushed Below 1 Ω


If the result is not as specified, replace the stop light switch assembly.