Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2012.12–2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050200 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81561D 1.REMOVE REAR COMBINATION LIGHT LENS AND BODY LH

a.
E270433
1.344,3.042 1.76,2.625 true 1.198,3.021 1.51,3.177 0.313,0.156 10 *1
*1 Protective Tape


Put protective tape around the rear combination light assembly LH.


b.

Remove the 2 bolts.


c.

Move the rear combination light assembly LH in the direction of the arrow in the illustration, and detach the 2 clips.


d.
E269009

Turn the rear turn signal light bulb socket with the rear turn signal light bulb in the direction indicated by the arrow to disconnect them as a unit.


e.
E269005

Turn the tail and stop light bulb socket with the tail and stop light bulb in the direction indicated by the arrow to disconnect them as a unit.


f.

Remove the rear combination light lens and body LH.


Hide 81550H 2.REMOVE TAIL AND STOP LIGHT BULB

a.
E269007

Remove the tail and stop light bulb from the tail and stop light bulb socket.


Hide 81550L 3.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E269011

Remove the rear turn signal light bulb from the rear turn signal light bulb socket.