Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2012.12–2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050200 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 81550L 1.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E269012

Install the rear turn signal light bulb to the rear turn signal light bulb socket.


Hide 81550H 2.INSTALL TAIL AND STOP LIGHT BULB

a.
E269008

Install the tail and stop light bulb to the tail and stop light bulb socket.


Hide 81561D 3.INSTALL REAR COMBINATION LIGHT LENS AND BODY LH

a.
E269010

Turn the rear turn signal light bulb socket with the rear turn signal light bulb in the direction indicated by the arrow to install them as a unit.


b.
E269006

Turn the tail and stop light bulb socket with the tail and stop light bulb in the direction indicated by the arrow to install them as a unit.


c.
E270434
1.417,3.063 1.833,2.646 true 1.26,3.042 1.573,3.198 0.313,0.156 10 *1
*1 Protective Tape


Put protective tape around the rear combination light assembly LH.


d.

Move the rear combination light assembly LH in the direction of the arrow in the illustration and attach the 2 clips to install the rear combination light assembly LH.


e.

Install the 2 bolts.