Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT DIMMER SWITCH › 2012.12–2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050196 HEADLIGHT DIMMER SWITCH G

LIGHTING (EXT)  HEADLIGHT DIMMER SWITCH  INSPECTION  


PROCEDURE

Hide 84140 1.INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LHD)

a.
E269070C01
0.552,1.125 1.052,1.24 true 1.115,1.74 1.24,1.281 true 1.396,1.75 1.375,1.281 true 1.875,1.74 1.781,1.281 true 0.104,0.063 0.417,0.219 0.313,0.156 10 false *a 0.427,1.031 0.583,1.229 0.156,0.198 10 false A 1.052,1.76 1.208,1.958 0.156,0.198 10 false H 1.375,1.76 1.531,1.958 0.156,0.198 10 false T 1.844,1.771 2.146,2.01 0.302,0.24 10 false EL
*a Component without harness connected
(Headlight Dimmer Switch Assembly)


Inspect the light control switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
20 (A) - 15 (EL) Light control switch off 10 kΩ or higher
19 (H) - 15 (EL)
18 (T) - 15 (EL)
20 (A) - 15 (EL) Light control switch AUTO position Below 1 Ω
18 (T) - 15 (EL) Light control switch tail position Below 1 Ω
18 (T) - 15 (EL) Light control switch head position Below 1 Ω
19 (H) - 15 (EL)


If the result is not as specified, replace the headlight dimmer switch assembly.



b.
E269070C03
1.354,1.688 1.51,1.281 true 1.667,1.677 1.781,1.292 true 2.167,1.698 1.927,1.281 true 0.073,0.042 0.385,0.198 0.313,0.156 10 *a 1.25,1.698 1.563,1.896 0.313,0.198 10 HF 1.594,1.698 1.906,1.896 0.313,0.198 10 EL 2.115,1.698 2.427,1.896 0.313,0.198 10 HU
*a Component without harness connected
(Headlight Dimmer Switch Assembly)


Inspect the headlight dimmer switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
17 (HF) - 15 (EL) Headlight dimmer switch flash position Below 1 Ω
14 (HU) - 15 (EL)
14 (HU) - 15 (EL) Headlight dimmer switch high position Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.



c.
E269070C05
1.604,1.74 1.792,1.292 true 2.083,1.76 2.188,1.271 true 2.469,1.74 2.333,1.281 true 0.083,0.042 0.396,0.198 0.313,0.156 10 *a 1.5,1.76 1.813,1.958 0.313,0.198 10 EL 2,1.771 2.313,1.969 0.313,0.198 10 TR 2.438,1.76 2.75,1.958 0.313,0.198 10 TL
*a Component without harness connected
(Headlight Dimmer Switch Assembly)


Inspect the turn signal switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
12 (TR) - 15 (EL) Turn signal switch right turn position Below 1 Ω
12 (TR) - 15 (EL) Turn signal switch neutral position 10 kΩ or higher
11 (TL) - 15 (EL)
11 (TL) - 15 (EL) Turn signal switch left turn position Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.



d.
E269070
1.24,1.021 1.146,0.49 true 1.385,1.01 1.677,0.469 true 1.531,1.01 2.167,0.469 true 0.083,0.073 0.396,0.229 0.313,0.156 10 *a 1.01,0.313 1.469,0.51 0.458,0.198 10 BFG 1.542,0.313 2,0.51 0.458,0.198 10 LFG 2.156,0.323 2.615,0.521 0.458,0.198 10 B
*a Component without harness connected
(Headlight Dimmer Switch Assembly)


Inspect the fog light switch (w/ Fog Light).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
9 (BFG) - 8 (LFG) Front fog light switch off 10 kΩ or higher
9 (BFG) - 8 (LFG) Front fog light switch on Below 1 Ω
9 (BFG) - 8 (LFG) Rear fog light switch on Below 1 Ω
7 (B) - 8 (LFG)


If the result is not as specified, replace the headlight dimmer switch assembly.



Hide 84140 2.INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RHD)

a.
E269070
2.375,1.25 2.844,1.177 true 2.198,1.292 2.302,1.771 true 2.052,1.281 2.063,1.771 true 1.656,1.292 1.552,1.792 true 0.083,0.073 0.396,0.229 0.313,0.156 10 *a 2.865,1.094 3.021,1.292 0.156,0.198 10 A 2.281,1.771 2.438,1.969 0.156,0.198 10 H 2.031,1.781 2.188,1.979 0.156,0.198 10 T 1.469,1.802 1.688,2.042 0.219,0.24 10 EL
*a Component without harness connected
(Headlight Dimmer Switch Assembly)


Inspect the light control switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
11 (A) - 16 (EL) Light control switch off 10 kΩ or higher
12 (H) - 16 (EL)
13 (T) - 16 (EL)
11 (A) - 16 (EL) Light control switch AUTO position Below 1 Ω
13 (T) - 16 (EL) Light control switch tail position Below 1 Ω
13 (T) - 16 (EL) Light control switch head position Below 1 Ω
12 (H) - 16 (EL)


If the result is not as specified, replace the headlight dimmer switch assembly.



b.
E269070
1.542,1.74 1.646,1.292 true 1.25,1.75 1.51,1.292 true 2.094,1.771 1.917,1.271 true 0.063,0.042 0.375,0.198 0.313,0.156 10 *a 1.469,1.75 1.781,1.948 0.313,0.198 10 EL 2.063,1.76 2.375,1.958 0.313,0.198 10 HF 1.146,1.75 1.458,1.948 0.313,0.198 10 HU
*a Component without harness connected
(Headlight Dimmer Switch Assembly)


Inspect the headlight dimmer switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
14 (HF) - 16 (EL) Headlight dimmer switch flash position Below 1 Ω
17 (HU) - 16 (EL)
17 (HU) - 16 (EL) Headlight dimmer switch high position Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.



c.
E269070
1.771,1.76 1.667,1.281 true 1.281,1.792 1.25,1.292 true 0.865,1.771 1.115,1.292 true 0.094,0.083 0.406,0.24 0.313,0.156 10 *a 1.729,1.781 2.042,1.979 0.313,0.198 10 EL 0.771,1.792 1.083,1.99 0.313,0.198 10 TR 1.219,1.802 1.531,2 0.313,0.198 10 TL
*a Component without harness connected
(Headlight Dimmer Switch Assembly)


Inspect the turn signal switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
20 (TR) - 16 (EL) Turn signal switch right turn position Below 1 Ω
20 (TR) - 16 (EL) Turn signal switch neutral position 10 kΩ or higher
19 (TL) - 16 (EL)
19 (TL) - 16 (EL) Turn signal switch left turn position Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.



d.
E269070
2.177,1.031 2.656,0.49 true 2.042,1.031 2.146,0.469 true 0.083,0.083 0.396,0.24 0.313,0.156 10 *a 2.552,0.323 3.01,0.521 0.458,0.198 10 BFG 2.031,0.313 2.49,0.51 0.458,0.198 10 LFG
*a Component without harness connected
(Headlight Dimmer Switch Assembly)


Inspect the fog light switch (w/ Fog Light).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (BFG) - 3 (LFG) Front fog light switch off 10 kΩ or higher
2 (BFG) - 3 (LFG) Front fog light switch on Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.