16331A
1.INSTALL THERMOSTAT
Install a new gasket to the thermostat.
| *1 | Jiggle Valve |
Install the thermostat with the jiggle valve facing upward.
The jiggle valve may be set to within 10° on either side of the prescribed position.
16321
2.INSTALL WATER INLET
Install the water inlet with the 3 bolts.
16288
3.INSTALL NO. 4 WATER BY-PASS PIPE
Apply soapy water to a new O-ring and install it to the No. 4 water by-pass pipe.
Install the No. 4 water by-pass pipe with the bolt.
16572D
4.CONNECT NO. 2 RADIATOR HOSE
16264D
5.INSTALL NO. 2 WATER BY-PASS HOSE
| *a | Top |
| *b | RH Side |
| *c | Rear Side |
Install the No. 2 water by-pass hose to the No. 4 water by-pass pipe and radiator reservoir assembly, slide the 2 clamps to secure it.
The direction of the hose clamp is indicated in the illustration.
6.ADD ENGINE COOLANT
7.INSPECT FOR COOLANT LEAK
51441
8.INSTALL NO. 1 ENGINE UNDER COVER