Home › Engine / Hybrid System › 2AD-FHV COOLING › RELAY
RM3090E _51 Engine / Hybrid System _008738 2AD-FHV COOLING _0050226 RELAY G

2AD-FHV COOLING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85927 1.INSPECT NO. 1 COOLING FAN RELAY (FAN NO. 1)

a.
A281356
0.729,0.667 0.635,0.667 0.635,0.667 0.573,1 true 0.646,1.635 0.75,1.635 0.75,1.635 0.813,1.302 true 1.396,0.698 1.281,0.698 1.281,0.698 1.125,0.938 true 1.406,1.615 1.292,1.615 1.292,1.615 1.125,1.354 true 1.406,0.573 1.542,0.729 0.135,0.156 10 1 1.448,1.5 1.583,1.656 0.135,0.156 10 2 0.781,0.531 0.917,0.688 0.135,0.156 10 3 0.531,1.552 0.667,1.708 0.135,0.156 10 5 2.365,0.604 2.5,0.76 0.135,0.156 10 1 2.365,1.51 2.5,1.667 0.135,0.156 10 2 2.75,0.604 2.885,0.76 0.135,0.156 10 3 2.75,1.51 2.885,1.667 0.135,0.156 10 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the No. 1 cooling fan relay.


Hide 85927A 2.INSPECT NO. 2 COOLING FAN RELAY (FAN NO. 2)

a.
A299154
2.75,1.573 3.104,1.573 true 1.938,0.333 2.188,0.333 2.188,0.333 2.313,0.635 true 2.563,0.677 2.563,0.281 true 2.813,0.635 2.99,0.313 2.99,0.313 3.208,0.313 true 2,1.156 2.375,1.156 true 1.823,0.198 1.979,0.396 0.156,0.198 10 1 2.531,0.094 2.688,0.292 0.156,0.198 10 4 3.25,0.198 3.406,0.396 0.156,0.198 10 2 3.115,1.438 3.271,1.635 0.156,0.198 10 3 1.875,1.021 2.031,1.219 0.156,0.198 10 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Battery voltage not applied between terminals 1 and 2 Below 1 Ω
Battery voltage applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the No. 2 cooling fan relay.


Hide 85927B 3.INSPECT NO. 3 COOLING FAN RELAY (FAN NO. 3)

a.
A281356
0.729,0.667 0.635,0.667 0.635,0.667 0.573,1 true 0.646,1.635 0.75,1.635 0.75,1.635 0.813,1.302 true 1.396,0.698 1.281,0.698 1.281,0.698 1.125,0.938 true 1.406,1.615 1.292,1.615 1.292,1.615 1.125,1.354 true 1.406,0.573 1.542,0.729 0.135,0.156 10 1 1.448,1.5 1.583,1.656 0.135,0.156 10 2 0.781,0.531 0.917,0.688 0.135,0.156 10 3 0.531,1.552 0.667,1.708 0.135,0.156 10 5 2.365,0.604 2.5,0.76 0.135,0.156 10 1 2.365,1.51 2.5,1.667 0.135,0.156 10 2 2.75,0.604 2.885,0.76 0.135,0.156 10 3 2.75,1.51 2.885,1.667 0.135,0.156 10 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the No. 3 cooling fan relay.