Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008784 METER / GAUGE / DISPLAY _0050254 METER / GAUGE SYSTEM W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Utility / Customize / Warning or Display.


v.

Select the setting by referring to the table below.


vi.

for Segment Display Type:

Warning
Tester Display Description Default Setting ECU
Key Remind Sound Function to change the key reminder buzzer sound frequency Normal 00:Normal,01:Slow,10:Fast Combination meter assembly
Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
Lane Change Flashing Times Setting Function to change the lane change flashing time 3 00:OFF,01:3,10:5,11:7 Combination meter assembly
50006 7

*: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.


Display
Tester Display Description Default Setting ECU
ECO Drive Indicator Zone Function to enable or disable the eco driving indicator zone display in the multi-information display ON 0:OFF,1:ON Combination meter assembly
ODO Display Time After IG OFF Setting Function to change the odometer display time 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly
50006 14
Unit conversion
Tester Display Description Default Setting ECU
Units By Region Function to change the multi-information display unit Km/l 000:Km/l JP,100:Km/l,010:Ml/g US,110:Ml/g UK,001:km/g Combination meter assembly
50006 15

vii.

for Dot Display Type:

Warning
Tester Display Description Default Setting ECU
Key Remind Sound Function to change the key reminder buzzer sound frequency Normal 00:Normal,01:Slow,10:Fast Combination meter assembly
Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
Rear Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
Lane Change Flashing Times Setting Function to change the lane change flashing time 3 00:OFF,01:3,10:5,11:7 Combination meter assembly
50006 7
Display
Tester Display Description Default Setting ECU
ECO Drive Indicator Zone Function to enable or disable the eco driving indicator zone display in the multi-information display ON 0:OFF,1:ON Combination meter assembly
ODO Display Time After IG OFF Setting Function to change the odometer display time 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly
50006 14


b.

Customizing with the combination meter assembly

i.

Turn the ignition switch to ON.


ii.

Select the setting by referring to the table below.

for Dot Display Type
Display Default Content Setting Relevant ECU
LANGUAGE ENGLISH Function to change the multi-information display language ENGLISH, FRANCAIS, DEUTSCH, ITALIANO, ESPANOL or PYCCKNN Combination meter assembly
UNIT miles Function to change the multi-information display unit miles or km (l/100 km) Combination meter assembly
ECO indicator* ON Function to turn on/off the eco driving indicator light ON or OFF Combination meter assembly

*: except Manual Transaxle


for Segment Display Type
Setting Part Default Content Setting Relevant ECU
Eco driving indicator light* Eco On Function to turn on/off the eco driving indicator light Eco On or Eco OFF Combination meter assembly

*: except Manual Transaxle