Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008784 METER / GAUGE / DISPLAY _0050254 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  U0100  Lost Communication with ECM / PCM "A"  U0129  Lost Communication with Skid Control ECU  U0131  Lost Communication with Electric Power Steering ECU  U0142  Lost Communication with Main Body ECU  U0151  Lost Communication with Airbag ECU  


DESCRIPTION

·

The combination meter assembly communicates with the ECM via the CAN communication system.

·

The combination meter assembly communicates with the brake actuator assembly (skid control ECU) via the CAN communication system.

·

The combination meter assembly communicates with the power steering ECU assembly via the CAN communication system.

·

The combination meter assembly communicates with the main body ECU (multiplex network body ECU) via the CAN communication system.

·

The combination meter assembly communicates with the airbag sensor assembly via the CAN communication system.


DTC No. Detection Item DTC Detection Condition Trouble Area
U0100 Lost Communication with ECM / PCM "A" Both conditions are met:
·

IG voltage is 10.5 V or higher.

·

No communication with the ECM continues for 2 seconds or more.


·

ECM

·

CAN communication system

·

Combination meter assembly


U0129 Lost Communication with Skid Control ECU Both conditions are met:
·

IG voltage is 10.5 V or higher.

·

No communication with the brake actuator assembly (skid control ECU) continues for 3 seconds or more.


·

Brake actuator assembly (skid control ECU)

·

CAN communication system

·

Combination meter assembly


U0131 Lost Communication with Electric Power Steering ECU Both conditions are met:
·

IG voltage is 10.5 V or higher.

·

No communication with the power steering ECU assembly continues for 3 seconds or more.


·

Power steering ECU assembly

·

CAN communication system

·

Combination meter assembly


U0142 Lost Communication with Main Body ECU Both conditions are met:
·

IG voltage is 10.5 V or higher.

·

No communication with the main body ECU (multiplex network body ECU) continues for 3 seconds or more.


·

Main body ECU (Multiplex network body ECU)

·

CAN communication system

·

Combination meter assembly


U0151 Lost Communication with Airbag ECU Both conditions are met:
·

IG voltage is 10.5 V or higher.

·

No communication with the airbag sensor assembly continues for 10 seconds or more.


·

Airbag sensor assembly

·

CAN communication system

·

Combination meter assembly



PROCEDURE

1.CHECK FOR DTC
a.

Check for DTCs.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes
50001 122
HINT:

If CAN communication system DTC U0100, U0129, U0131, U0142, or U0151 and another DTC are output at the same time, perform troubleshooting for CAN communication system DTC U0100, U0129, U0131, U0142, or U0151 first.



Result:
Proceed to
CAN communication system DTC is not output
CAN communication system DTC is output (for LHD)
CAN communication system DTC is output (for RHD)



CAN communication system DTC is not output

CAN communication system DTC is output (for LHD)

CAN communication system DTC is output (for RHD)