87130K
1.ADJUST NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
When removing the No. 2 air duct sub-assembly, change the A/C to DEF mode beforehand, as the No. 1 blower servo sub-assembly may be damaged otherwise.
73900
2.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
87201B
3.REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY
55107A
4.REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY
Disconnect the 2 connectors and 2 clamps.
Push the clutch master cylinder push rod clevis upward and toward the left side of the vehicle.
Remove the 2 bolts, 2 nuts and clutch pedal support sub-assembly.
84520
5.REMOVE CLUTCH START SWITCH ASSEMBLY
88280A
6.REMOVE CLUTCH SWITCH ASSEMBLY
31394A
7.REMOVE CLUTCH PEDAL SPRING
Remove the clutch pedal spring.
31301
8.REMOVE CLUTCH PEDAL SUB-ASSEMBLY
Remove the bolt, nut and clutch pedal sub-assembly from the clutch pedal support.
31353
9.REMOVE CLUTCH PEDAL SPRING HOLDER
Remove the clutch pedal spring holder.
31324A
10.REMOVE CLUTCH PEDAL SHAFT COLLAR
Remove the 2 bushes and clutch pedal shaft collar.
31301B
11.REMOVE NO. 1 CLUTCH PEDAL CUSHION
Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.
31321
12.REMOVE CLUTCH PEDAL PAD
Remove the clutch pedal pad from the clutch pedal sub-assembly.