Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER(for RHD)
RM3090E _52 Drivetrain _008754 CLUTCH _0050266 CLUTCH MASTER CYLINDER(for RHD) A

CLUTCH  CLUTCH MASTER CYLINDER(for RHD)  REMOVAL  


PROCEDURE

Hide 89871A 1.REMOVE INJECTOR DRIVER

Hide 73900 2.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 3.DRAIN BRAKE FLUID

NOTICE:

Wash brake fluid off immediately if it adheres to any painted surface.


Hide 31434 4.DISCONNECT CLUTCH RESERVOIR TUBE

C279739

a.

Slide the clamp and disconnect the clutch reservoir tube from the clutch master cylinder assembly.

HINT:

Use a container to catch the fluid.



Hide 31481 5.DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

C279740

a.

Using a union nut wrench, disconnect the clutch master cylinder to flexible hose tube.

HINT:

Use a container to catch the fluid.



Hide 31410 6.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

a.
C279735

Remove the 2 nuts and clutch master cylinder assembly.


b.
C279742

Push the clutch master cylinder push rod clevis upward and it toward the left side of the vehicle.


Hide 31459 7.REMOVE CLUTCH MASTER CYLINDER BRACKET

C279736

a.

Remove the clutch master cylinder bracket from the clutch master cylinder assembly.


Hide 31453 8.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

a.
C125987C01
1.646,1.135 1.531,0.5 1.531,0.5 1.271,0.5 false 2.229,0.875 2.115,0.24 2.115,0.24 1.854,0.24 false 1.01,0.417 1.323,0.615 0.313,0.198 10 *1 1.615,0.146 1.927,0.344 0.313,0.198 10 *2 1.115,1.844 1.427,2.042 0.313,0.198 10 A
*1 Lock Nut
*2 Clutch Master Cylinder Push Rod Clevis


Measure dimension A as shown in the illustration before loosening the lock nut.


b.
C279738

Loosen the lock nut and remove the clutch master cylinder push rod clevis.


c.

Remove the lock nut.