Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT
RM3090E _58 Vehicle Interior _008429 LIGHTING (INT) _0050311 IGNITION KEY CYLINDER LIGHT G

LIGHTING (INT)  IGNITION KEY CYLINDER LIGHT  INSPECTION  


PROCEDURE

Hide 89782 1.INSPECT TRANSPONDER KEY COIL

a.
E269162
1.24,1.74 1.531,1.26 true 2.167,1.729 1.896,1.26 true 0.094,0.083 0.406,0.24 0.313,0.156 10 *a 2.083,1.729 2.698,1.927 0.615,0.198 10 ILL+ 1.135,1.75 1.75,1.948 0.615,0.198 10 ILL-
*a Component without harness connected
(Transponder Key Coil)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (ILL+)
Battery negative (-) → Terminal 4 (ILL-)
Illuminates


If the result is not as specified, replace the transponder key coil.