84233
1.INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
| *1 | Terminal 1 |
| *2 | Switch Body |
| *a | Component without harness connected
(Front Door Courtesy Light Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| Terminal 1 - Switch body | Pushed | 10 kΩ or higher |
| Not pushed | Below 1 Ω |
If the result is not as specified, replace the front door courtesy light switch assembly.