Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY
RM3090E _58 Vehicle Interior _008788 SEAT BELT _0050329 REAR SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73370C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

a.
B338896
2.75,1.833 2.417,1.458 false 2.75,1.833 1.75,1.917 false 2.344,0.063 2.656,0.26 0.313,0.198 10 *a 0.552,1.302 0.865,1.5 0.313,0.198 10 *b 1.177,0.365 1.49,0.563 0.313,0.198 10 *c 2.792,1.75 3.104,1.948 0.313,0.198 10 *1
*1 Retractor
*a Unlocked
*b Locked
*c 45°


Before installing the rear No. 1 seat outer belt assembly, check the ELR.

i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the operation is not as specified, replace the rear No. 1 seat outer belt assembly.

NOTICE:

Do not disassemble the retractor.




b.

w/ ALR:

Check the fastening function of the child restraint system.

NOTICE:

The check should be performed with the outer belt installed.


i.

When the belt is pulled out fully, the belt should automatically start to retract.


ii.

After the belt has fully retracted, the belt should be able to be pulled out and retracted again.

If the operation is not as specified, replace the rear No. 1 seat outer belt assembly.