83950M
1.INSPECT TELLTALE LIGHT ASSEMBLY (SEAT BELT WARNING LIGHT)
| *a | Indicator A |
| *b | Indicator B |
| *c | Indicator C |
| *d | Component without harness connected
(Telltale Light Assembly (seat belt warning light)) |
Apply battery voltage to the connector according to the table below.
| Battery Connection | Result |
|---|---|
| Battery positive (+) - Terminal 9 (LAPB)
Battery negative (-) - Terminal 22 (RLID) |
Indicator A comes on |
| Battery positive (+) - Terminal 9 (LAPD)
Battery negative (-) - Terminal 23 (RCID) |
Indicator B comes on |
| Battery positive (+) - Terminal 9 (LAPD)
Battery negative (-) - Terminal 24 (RRID) |
Indicator C comes on |
If the result is not as specified, replace the telltale light assembly (seat belt warning light).