Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM3090E _58 Vehicle Interior _008788 SEAT BELT _0050356 OCCUPANT DETECTION SENSOR G

SEAT BELT  OCCUPANT DETECTION SENSOR  INSPECTION  


PROCEDURE

Hide 71512S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

a.
B332793
0.177,0.167 0.49,0.323 0.313,0.156 10 *a
*a Component without harness connected
(Separate Type Front Seat Cushion Pad (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Front passenger seat occupied Below 100 Ω
1 - 3 Front passenger seat not occupied 10 kΩ or higher


If the result is not as specified, replace the separate type front seat cushion pad (occupant detection sensor).