Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR SYSTEM › 2012.12–2013.11
RM3090E _59 Vehicle Exterior _008794 DOOR / HATCH _0050374 POWER BACK DOOR SYSTEM D

DOOR / HATCH  POWER BACK DOOR SYSTEM  SYSTEM DESCRIPTION  


POWER BACK DOOR SYSTEM DESCRIPTION


a.

The power back door system controls the power back door by automatically opening and closing the power back door with a motor.

i.

The power back door system operates only when the necessary conditions are satisfied.


ii.

The multiplex network door ECU records the back door positions in the multiplex network door ECU.

If the battery, power back door fuse, or multiplex network door ECU is removed and then reinstalled, the multiplex network door ECU loses the memory of the door positions.

In such cases, initialization of the multiplex network door ECU is necessary. Refer to the Initialization.

Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>INITIALIZATION


iii.

The multiplex network door ECU receives "OPEN/CLOSE" request signals for the back door. Then, the multiplex network door ECU controls the back door opening/closing operation by sending commands to the back door lock assembly and back door motor.


iv.

The power back door system has various request signals: "OPEN/CLOSE" request signal from the transmitter switch, "OPEN/CLOSE" request signal from the power back door control switch, "OPEN" request signal from the back door opener switch assembly, "CLOSE" request signal from the power back door closer switch, and "OFF" request signal from the power back door main switch.


v.

The power back door system sets off an alarm (using a buzzer) and hazard warning lights* when the power back door starts operating.

*: w/o Follow Me Home System



vi.

The power back door does not reverse the direction that the power back door is operating and stops if any switch is pressed during operation.


vii.

A pulse sensor and a power back door sensor assembly are used to prevent anything from being caught in the door while the power back door is closing (jam protection function).



b.

Function of main components:

Component Function
Wireless door lock buzzer
·

Sounds for 0.8 seconds when the door control switch assembly, back door control switch, back door opener switch assembly or transmitter switch is pressed.

·

Sounds intermittently while the power back door is operating.

·

Sounds twice for 0.1 seconds to notify that the direction of door movement will stop after being triggered by activation of the jam protection function.

·

Sounds for 0.2 seconds when the back door opener switch assembly is pressed while the power back door is operating.


Hazard warning lights (w/o Follow Me Home System) Flash twice to notify that the power back door will start operating when an OPEN/CLOSE request signal is input from a switch while the back door is in the closed or fully open position.
Power back door main switch
·

The power back door system does not operate when the switch is pushed.

·

The power back door system operates when the switch is not pushed.


Transmitter switch
·

Pressing the switch causes the power back door to open/close.

·

Pressing the switch again during operation stops.


Back door control switch Transmits a power back door OPEN/CLOSE request signal to the multiplex network door ECU via the main body ECU (multiplex network body ECU).
Back door opener switch assembly Transmits a power back door OPEN request signal to the multiplex network door ECU via the certification ECU (smart key ECU assembly) (w/ Entry and Start System) or main body ECU (multiplex network body ECU) (w/o Entry and Start System).
Door control switch assembly Transmits a power back door CLOSE signal to the multiplex network door ECU.



POWER BACK DOOR OPERATION TIMING CHART


a.

Opening Operation (using back door control switch and transmitter switch):

E271190E04
2.406,0.396 4.094,0.594 1.688,0.198 10 false 0.8 seconds 2.958,1.375 4.646,1.573 1.688,0.198 10 false 0.8 seconds 0.042,0.854 1.542,1.375 1.5,0.521 10 false Back door control switch or transmitter switch 1.573,0.906 1.885,1.104 0.313,0.198 10 false On 1.583,1.198 2.042,1.396 0.458,0.198 10 false Off 0.042,1.969 0.938,2.333 0.896,0.365 10 false Wireless door lock buzzer 1.573,2.135 2.031,2.333 0.458,0.198 10 false Off 1.563,1.813 1.875,2.01 0.313,0.198 10 false On 1.552,3.115 2.01,3.313 0.458,0.198 10 false Off 1.542,2.844 1.854,3.042 0.313,0.198 10 false On 1.542,6.896 2,7.094 0.458,0.198 10 false Off 1.531,6.604 1.844,6.802 0.313,0.198 10 false On 1.563,5.958 2.021,6.156 0.458,0.198 10 false Off 1.573,5.01 2.031,5.208 0.458,0.198 10 false Off 1.563,4.708 1.875,4.906 0.313,0.198 10 false On 1.521,3.76 1.833,3.958 0.313,0.198 10 false On 1.521,4.042 1.979,4.24 0.458,0.198 10 false Off 0.052,2.979 1.385,3.323 1.333,0.344 10 false Back door lock motor 0.083,3.948 1.417,4.292 1.333,0.344 10 false Latch switch 0.073,4.792 1.281,5.135 1.208,0.344 10 false Back door courtesy switch 0.104,5.76 1.406,6.104 1.302,0.344 10 false Power back door unit assembly set 1.906,5.458 2.781,5.667 0.875,0.208 10 false Open output 4.302,5.708 5.188,6.052 0.885,0.344 10 false Speed control range 0.094,6.396 1.417,6.917 1.323,0.521 10 false Hazard warning light (w/o Follow Me Home System) 1.875,3.208 2.813,3.406 0.938,0.198 10 false Release output 0.229,7.365 1.771,7.583 1.542,0.219 10 false State of back door 1.917,7.365 3.458,7.583 1.542,0.219 10 false Fully opened 2.875,7.365 4.417,7.583 1.542,0.219 10 false Door ajar 5.813,7.385 7.156,7.792 1.344,0.406 10 false Memory stop position 3.667,0.469 6.708,0.833 3.042,0.365 10 false Conditions to start automatic operation are met 1.833,2.271 2.792,2.615 0.958,0.344 10 false Returns to original position


b.

Opening Operation (using back door opener switch assembly):

E271191E03
0.177,7.354 3.083,7.552 2.906,0.198 10 false State of back door 1.948,7.365 3.323,7.563 1.375,0.198 10 false Fully opened 3.135,7.354 4.51,7.552 1.375,0.198 10 false Door ajar 5.833,7.375 7.156,7.729 1.323,0.354 10 false Memory stop position 1.948,5.458 3.635,5.656 1.688,0.198 10 false Open output 4.552,5.719 5.479,6.146 0.927,0.427 10 false Speed control range 0.125,0.854 1.229,1.198 1.104,0.344 10 false Back door opener switch assembly 1.542,1.198 2,1.396 0.458,0.198 10 false Off 1.531,2.125 1.99,2.323 0.458,0.198 10 false Off 1.573,4.063 2.031,4.26 0.458,0.198 10 false Off 1.563,5 2.021,5.198 0.458,0.198 10 false Off 1.542,5.948 2,6.146 0.458,0.198 10 false Off 1.573,6.906 2.031,7.104 0.458,0.198 10 false Off 1.573,6.583 2.031,6.781 0.458,0.198 10 false On 1.573,4.698 2.031,4.896 0.458,0.198 10 false On 1.563,3.74 2.021,3.938 0.458,0.198 10 false On 1.521,1.802 1.979,2 0.458,0.198 10 false On 1.531,0.906 1.99,1.104 0.458,0.198 10 false On 0.125,1.833 1.01,2.198 0.885,0.365 10 false Wireless door lock buzzer 0.104,2.74 1.448,3.094 1.344,0.354 10 false Back door lock motor 1.844,3.219 3.25,3.552 1.406,0.333 10 false Release output 0.104,3.875 1.448,4.229 1.344,0.354 10 false Latch switch 0.094,4.813 1.313,5.177 1.219,0.365 10 false Back door courtesy switch 0.104,5.677 1.396,6.031 1.292,0.354 10 false Power back door unit assembly set 0.073,6.333 1.396,6.833 1.323,0.5 10 false Hazard warning light (w/o Follow Me Home System) 3.052,1.385 4.74,1.583 1.688,0.198 10 false 0.8 seconds 3.656,0.792 6.531,1.208 2.875,0.417 10 false Conditions to start automatic operation are met 3.646,2.365 7.01,2.563 3.365,0.198 10 false Operation standby time 1.844,2.25 2.792,2.594 0.948,0.344 10 false Returns to original position


c.

Closing Operation (using back door control switch and transmitter switch):

E271192E03
0.052,0.802 1.198,1.323 1.146,0.521 10 false Back door control switch or transmitter switch 1.563,1.188 2.021,1.385 0.458,0.198 10 false Off 1.563,2.135 2.021,2.333 0.458,0.198 10 false Off 1.542,3.99 2,4.188 0.458,0.198 10 false Off 1.542,4.969 2,5.167 0.458,0.198 10 false Off 1.552,5.948 2.01,6.146 0.458,0.198 10 false Off 1.563,6.896 2.021,7.094 0.458,0.198 10 false Off 1.552,6.615 2.01,6.813 0.458,0.198 10 false On 1.552,5.448 2.01,5.646 0.458,0.198 10 false On 1.531,4.667 1.99,4.865 0.458,0.198 10 false On 1.542,3.729 2,3.927 0.458,0.198 10 false On 1.573,1.802 2.031,2 0.458,0.198 10 false On 1.552,0.865 2.01,1.063 0.458,0.198 10 false On 2.396,0.396 4.083,0.594 1.688,0.198 10 false 0.8 seconds 3,1.375 4.688,1.573 1.688,0.198 10 false 0.8 seconds 5.948,2.375 6.938,2.615 0.99,0.24 10 false 1 second wait 0.083,1.875 1.25,2.229 1.167,0.354 10 false Wireless door lock buzzer 0.094,2.802 1.438,3.177 1.344,0.375 10 false Back door lock motor 0.083,3.802 1.427,4.177 1.344,0.375 10 false Latch switch 0.042,4.719 1.26,5.094 1.219,0.375 10 false Back door courtesy switch 0.073,5.594 1.396,5.958 1.323,0.365 10 false Power back door unit assembly set 0.073,6.292 1.396,6.813 1.323,0.521 10 false Hazard warning light (w/o Follow Me Home System) 0.167,7.375 1.49,7.74 1.323,0.365 10 false State of back door 2.198,7.375 3.521,7.74 1.323,0.365 10 false Stop position 5.448,7.396 6.771,7.76 1.323,0.365 10 false Door ajar 6.219,7.385 7.156,7.844 0.938,0.458 10 false Fully closed 1.917,5.469 2.729,5.656 0.813,0.188 10 true Close output 3.49,5.719 4.406,6.323 0.917,0.604 10 false Speed control range 3.646,0.448 6.635,0.979 2.99,0.531 10 false Conditions to start automatic operation are met 3.656,2.604 5.802,2.802 2.146,0.198 10 false Pull-in output 3.323,3.094 4.448,3.438 1.125,0.344 10 true Returns to original position 3.01,4.948 4.833,5.146 1.823,0.198 10 false Closer delay time 1 second


d.

Closing Operation (using back door opener switch assembly):

E271193E03
2.708,0.406 4.396,0.604 1.688,0.198 10 false 0.8 seconds 2.688,1.396 4.375,1.594 1.688,0.198 10 true 0.8 seconds 0.052,0.958 1.167,1.323 1.115,0.365 10 false Door control switch assembly 1.573,1.198 2.031,1.396 0.458,0.198 10 false Off 1.552,0.885 2.01,1.083 0.458,0.198 10 false On 0.052,1.906 0.927,2.271 0.875,0.365 10 false Wireless door lock buzzer 1.542,2.146 2,2.344 0.458,0.198 10 false Off 1.531,1.844 1.99,2.042 0.458,0.198 10 false On 5.938,2.385 7.156,2.792 1.219,0.406 10 false 1 second wait 1.521,3.729 1.979,3.927 0.458,0.198 10 false On 1.521,4.031 1.979,4.229 0.458,0.198 10 false Off 1.573,4.958 2.031,5.156 0.458,0.198 10 false Off 1.573,4.698 2.031,4.896 0.458,0.198 10 false On 0.094,2.646 1.042,3 0.948,0.354 10 false Back door lock motor 0.104,3.833 1.938,4.031 1.833,0.198 10 false Latch switch 0.073,4.76 1.281,5.115 1.208,0.354 10 false Back door courtesy switch 0.271,7.375 3.177,7.573 2.906,0.198 10 false State of back door 2.458,7.365 5.365,7.563 2.906,0.198 10 false Stop position 5.656,7.396 6.625,7.844 0.969,0.448 10 false Fully closed 1.563,5.948 2.021,6.146 0.458,0.198 10 false Off 1.583,6.927 2.042,7.125 0.458,0.198 10 false Off 1.563,6.615 2.021,6.813 0.458,0.198 10 false On 0.021,5.667 1.354,6.031 1.333,0.365 10 false Power back door unit assembly set 2,5.469 2.792,5.656 0.792,0.188 10 true Close output 3.667,5.719 4.552,6.094 0.885,0.375 10 false Speed control range 0.052,6.344 1.385,6.865 1.333,0.521 10 false Hazard warning light (w/o Follow Me Home System) 3.615,2.604 5.76,2.802 2.146,0.198 10 false Pull-in output 3.333,3.094 4.469,3.531 1.135,0.438 10 false Returns to original position 3.146,4.99 4.844,5.188 1.698,0.198 10 false Closer delay time 1 second 3.448,0.802 6.531,1.188 3.083,0.385 10 false Conditions to start automatic operation are met